XMEGA Xminilab Oscilloscope, Logic Analyzer, Waveform Generator, Sniffer, FFT

Description

The Xminilab Portable is a small mixed signal oscilloscope with an arbitrary waveform generator and protocol sniffer.
Features:
Mixed Signal Oscilloscope: Simultaneous sampling of analog and digital signals.
Advanced Trigger: Normal / Single / Auto, with rising or falling edge and adjustable trigger level.
Meter Mode: Average, Peak to peak and Frequency readout.
XY Mode (Plot Lissajous patterns or see the phase difference between two waveforms).
Spectrum Analyzer with different windowing options and selectable vertical log.
Horizontal and Vertical Cursors with automatic waveform measurements.
Arbitrary Waveform Generator with Sweep on all parameters.
Display options: Persistence, Different grid options, and more.
Curve tracer function
General Specifications:
ATXMEGA32A4U 36KB Flash, 4KB SRAM, 1KB EEPROM
Graphic Green OLED display 2.42", 128x64 pixels
Enclosure size: 3.17" x 2.22" x 0.7"
Li-Ion Battery 750mAh
PDI interface.
4 tactile switches
USB connectivity: Windows, Linux, MAC, Android
Logic Analyzer specifications:
8 Digital Inputs, 3.3V / 5V
820k ohm input impedance
Maximum sampling rate: 2MSPS
Frequency counter: 16Mhz
Protocol Sniffer: UART, I2C, SPI
Internal pull up or pull down.
Buffer size: 256
Oscilloscope specifications:
2 Analog Inputs
Maximum Sampling rate: 2MSPS
Analog Bandwidth: 200kHz
Resolution: 8bits
Input Impedance: 1Mohm 15pF
Buffer size per channel: 256
Input Voltage Range: -14V to +20V
AWG specifications:
1 Analog Output
Maximum conversion rate: 1MSPS
Analog Bandwidth: 50kHz
Resolution: 8bits
Output current > +/- 7mA
Buffer size: 256
Output Voltage: +/- 4V