OWON XDS2102A 100MHz 12bit ADC High Resolution decode Digital Oscilloscope

Description

OWON XDS2102A 100MHz 12 bits High Resolution ADC Digital Oscilloscope
Description
Performance Specifications
Model
XDS2102A
Bandwidth
100MHz
Sample Rate
1GS/s
Vertical Resolution (A/D)
12 bits
Record length
20M
Waveform Refresh Rate
55,000 wfms/s
Horizontal Scale (s/div)
2ns/div - 1000s/div, step by 1 - 2 - 5
Rise Time (at input, typical)
≤3.5ns
Channel
2 + 1 (external)
Display
8" color LCD, 800 x 600 pixels
Input Impedance
1MΩ ± 2%, in parallel with 15pF ± 5pF
Channel Isolation
50Hz : 100 : 1, 10MHz : 40 : 1
Max Input Voltage
1MΩ ≤ 300Vrms; 50Ω ≤ 5Vrms
DC Gain Accuracy
±1.5%
DC Accuracy
average≥16：±(3% reading + 0.05 div) for △V
Probe Attenuation Factor
0.001X - 1000X, step by 1 - 2 - 5
LF Respond (AC, -3dB)
≥10Hz (at input, AC coupling, -3dB)
Sample Rate / Relay Time
±1ppm
Accuracy
Interpolation
sin(x) / x
Interval (△T) Accuracy
Single: ±(1 interval time + 1ppm x reading + 0.6ns);
(full bandwidth)
Average > 16: ±(1 interval time + 1ppm x reading + 0.4ns)
Input Coupling
DC, AC, and GND
Vertical Sensitivity
1mV/div - 10V/div (at input)
Trigger Type
Edge, Video, Pulse, Slope, Runt, Windows, Timeout, Nth Edge, Logic, I
2
C, SPI, RS232,
and CAN
Bus Decoding
I
2
C, SPI, RS232, and CAN
Trigger Mode
Auto, Normal, and Single
Vertical Range
±2V ( 1mv/div - 50mv/div), ±20V ( 100mv/div - 1V/div), ±200V (2V/div - 10V/div)
Line / Field Frequency (video)
NTSC, PAL and SECAM standard
Cursor Measurement
△V, and △T between cursors, △V and △T between cursors, and auto- cursors
Vpp, Vavg, Vrms, Freq, Period, Week RMS, Cursor RMS, Vmax, Vmin, Vtop, Vbase, Vamp, Automatic Measurement Overshoot, Phase, Preshoot, Rise Time, Fall Time,+Width, -Width, +Duty, -Duty, Duty Cycle, Delay
A→B ↑, Delay A→B↓, +Pulse Count, -Pulse Count, Rise Edge Count, Fall Edge Count
Waveform Math
＋, －, ×, ÷, FFT
Waveform Storage
50 waveforms
Lissajou's
Bandwidth
full bandwidth
Figure
Phase Difference
±3 degrees
Communication Interface
USB host, USB device, USB port for PictBridge, Trig Out (P/F), LAN, and VGA (optional)
Frequency Counter
available
Power Supply
100V - 240V AC, 50/60Hz, CAT II
Power Consumption
＜15W
Fuse
2A, T class, 250V
Battery (optional)
3.7V, 13200mAh
Dimension (W x H x D)
340 x 177 x 90 mm
Weight
2.60 kg
Specifications subject to change without prior notice.
＋
Application
electronic circuit debugging
circuit testing
design and manufacture
education and training
automobile maintenance and testing
Package list:
1.  XDS2102A
oscilloscope
(12bit ADC  for free ,decode including CAN,RS232 I2C,SPI)
2.  Power Cord
3.
CD Rom
4.
Quick Guide
5.
USB Cable
6.
Probe
7.
Probe Adjust
eBay Cross Border Trade powered by ChannelEffect