New HANTEK Handheld Scopemeter DSO 1060 Digital Oscilloscope Color LCD Display

Description

New HANTEK Handheld Scopemeter DSO 1060 Digital Oscilloscope Color LCD Display
This eBay listing is for a Brand New in the box HANTEK Handheld Oscilloscope Scopemeter model DSO 1060 that comes as you see pictured in the listing and noted above.    I picked this up at a local estate where I was told it was never even out of the box and I found all items pictured still in the plastic.   I did get a whiff of dampness like it was stored in a basement or garage.   The following details on this unit was found online:
Detailed Description
Excellent Industrial Design
Direct key for Each Channel, Time base, Trigger and DMM, easy to operate
Large 5.7 inch TFT Color LCD Display, Led backlight, Display clearly
USB Host/Device 2.0 full-speed interface, support removable disk
RS-232/LAN Optional, Easy to control by PC or long-distance
FFT, +, –, ×, /, X-Y, 22 kinds of auto measurements
PASS/FAIL Check, easy to use on production line
Multiform Trigger mode, 2 separate Time Base in ALT Trigger mode, easy to see 2 signal with different frequency
1000 waveforms save and record
Battery Power Operation (Installed)
Save waveform in the following:
jpg/bmp graphic file
MS excel/word file
Technical Specifications
Oscilloscope specification
DSO1060
DSO1200
DSO1600
DSO1600H
Vertical
Channels
2
Bandwidth
60MHz
200MHz
600MHz
Rise Time
5.8ns
1.7ns
0.58ns
Input Impedance
Resistance: 1M;
Capacitance: 15pF
Input Sensitivity
10mv/div to 5v/div
1mv/div to 5v/div
Input Coupling
AC, DC with Ground Level Indicator
Vertical Resolution
8bits
Memory Depth
32k at single channel; 16k at dual channels
Maximum Input
300V (DC+AC Peak)
Horizontal
Sampling
150MSa/s
500MSa/s
1GSa/s
2GSa/s
Equivalent Sampling
50GSa/s
Time Base
5ns/div~1000s/div
2ns/div~1000s/div
1ns/div~1000s/div
1ns/div~1000s/div
Time Base Precision
±50ppm
Trigger
Source
CH1, CH2
Mode
Edge, Pulse Width,
Alternative
Edge, Pulse Width, Alternative, Video
X-Y Mode
X-Axis Input
CH1
Y-Axis Input
CH2
Phrase Shift
Max.3 degree
Cursors and
Measurement
Voltage
Vpp, Vamp, Vmax, Vmin, Vtop, Vmid, VbaseVpp, Vamp, Vmax, Vmin,
Vtop, Vmid, Vbase, Vavg, Vrms, Vcrms, Preshoot, Overshoot
Time
Frequency, Period, Rise time, Fall Time, Positive Width,
Negative Width, Duty Cycle
Delay
Delay 1->2?, Delay 1-2?
Cursor
Manual, Track, Auto Measure Modes
Math
Addition, Subtraction, Multiplication, Division, FFT
Storage
15 waveforms and setups
Meter Mode
Maximum Resolution
6000 Counts
DMM Testing Modes
Voltage, Current, Resistance, Capacitance, Diode & Continuity
Maximum Input Voltage
AC : 600V
DC : 800V
Maximum Input Current
AC : 10A
DC : 10A
Input Impedance
10MO
Display
TFT LCD Type
5.7 Inch width LED Backlight Display
Display Resolution
240 (Vertical) × 320 (Horizontal) pixels
Interface
USB
USB 2.0
Optional
RS232, LAN
Power Source
Line Voltage Range
AC 100V ~ 240V, 50Hz ~ 60Hz;
DC Input: 8.5VDC,1500mA
Battery Power (Installed)
6 hours (Li-ion Battery)
Mechanics
Dimension
245 × 163 × 52 (mm)
Weight
1.2 Kg
Other
GND Reference Scope meter and Multimeter Independence
Meter Specification
Range
Accuracy
Resolution
DC Voltage
60.00mV
±1%±1 digit
10uV
600.0mV
100uV
6.000V
1mV
60.00 V
10mV
600.0V
100mV
800V
1V
AC Voltage
60.00mV
±1%±3 digit
10uV
600.0mV
100uV
6.000V
1mV
60.00 V
10mV
600.0V
100mV
DC Current
60.00mA
±1.5%±1 digit
10uA
600.0mA
±1%±1 digit
100uA
6.000A
±1.5%±3 digit
1mA
10.00 A
10mA
AC Current
60.00mA
±1.5%±3 digit
10uA
600.0mA
±1%±1 digit
100uA
6.000A
±1.5%±3 digit
1mA
10.00 A
10mA
Resistance
600.0
±1%±3 digit
0.1O
6.000K
±1%±1 digit
1O
60.00K
10O
600.0K
100O
6.000M
1KO
60.00M
±1.5%±3 digit
10KO
Capacitance
40.00nF
±1%±1 digit
10pF
400.0nF
100pF
4.000uF
1nF
40.00uF
10nF
400.0uF
100nF
Attention:
The smallest capacitance value
that can be measured is 5nF
Diode
0V-2.0V
On-off Test
< 30O
Seller Location Reference - Electronics/Tools
BID IN CONFIDENCE – CHECK MY FEEDBACK!
My goal is your satisfaction.   I leave positive feedback right after the payment is received for all orders!!   If you plan to leave anything less than positive feedback and 5 stars - please let me know so that I can work out any problems that you may have.   I aim to please!!
SHIPPING & HANDLING FOR US BIDDERS
We ship ASAP upon payment as noted above within 1 business day 99% of the time!!    We normally pack up your new treasures 2 - 3 times a day and ship using USPS and Fedex Ground so that you get your items in a timely fashion.   As always - there is no charge for local pickup on any of my items!!
SHIPPING AND HANDLING FOR INTERNATIONAL BIDDERS
Import duties, taxes and charges are
not included
in the item price or shipping charges. These charges are the buyer’s responsibility.
Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying.”
THANK YOU AND HAVE A WONDERFUL DAY!!
Powered by SixBit's eCommerce Solution