New Hantek 2 Channel DSO1102B Digital Handheld Oscilloscope /Multimeter 100MHz

Description

New Hantek 2 Channel DSO1102B Digital Handheld Oscilloscope /Multimeter 100MHz
New hantek DSO1102B digital oscilloscope /multimeter 100MHz 1Gsa/S 2CH, 100MHz bandwidth oscilloscope,1GSa/s sample rate,1M memory depth, and 6000 counts DMM with analog bargraph.5.6 inch TFT Color LCD display, high resolution.
Hantek Technologies specializes in designing high performance measurement solutions for various industries. With continuous innovation and collaboration with specialists and engineers, Hantek now delivers a range of new-generation oscilloscopes and other leading-edge high-tech products exceeding industry standards.
Features:
High bandwidth 60MHz-200MHz Oscilloscope,1GS/s sample rate, and 6000 counts DMM with analog bargraph
1M memory depth
High refresh rate (2500 frames)
Large 5 6 inch TFT color LCD display£¬High resolution(640*480£©, dual-window design --More clear, more detailed
One-touch automatic setup optimizes the position, range, timebase, and triggering to assure a stable display of virtually any waveform
Easy-to-use pop-up menu with built-in multi-language help system
23 automatic measurements
Waveform math: add, subtract, multiply, and divide
Store and recall over
Automatic cursor tracking measurements
XY Mode
Built-in FFT function converts a time-domain signal into its frequency components to measure harmonic content and distortion in systems
Waveform recorder to capture/replay input waveforms from CH1 and CH2 with a maximum record length of 1000 frames
Pass-Fail function compares a stored waveform to an unknown input
Average mode for smoothing waveforms
Square wave output (2V, 1kHz) for probe adjustment
USB host/device 2 0 full-speed interface ,support removeable disk, LAN Optional ,easy to control by PC or long-distance
Dimensions (mm):240(L)x165(W)x50(H), be carried easily
Labview\VB\VC second design instance
Specifications:
Model
DSO1202B
DSO1102B
DSO1062B
Oscilloscope mode
Bandwidth
200MHz
100MHz
60MHz
Real-time Sample Rate
1GSa/s
Equivalent Sample Rate
25GSa/s
Record Length(Sample Points)
Single-channel: Maximum 1M; Dual-channel:Maximum 512k
SEC/DIV Range
2nS/div-2000S/div (in a 2, 4, 8 sequence)
Delay Time Accuracy
500ps
Vertical
A/D Converter
8-bit resolution
VOLTS/DIV Range
2mV/div¡«5V/div at input BNC
Position Range
±50V(5V/div),±40V(2V/div¡«500mV/div),2V(200mV/div¡«50mV/div)±400mV(20mV/div¡«2mV/div)
Rise Time at BNC
≤1.7ns
≤3.5ns
≤5.8ns
DC Gain Accuracy
±4% for Sample or Average acquisition mode, 5mV/div to 2mV/div
±3% for Sample or Average acquisition mode, 5V/div to 10mV/div
Trigger
Trigger Sensitivity
(Edge Trigger Type)
DC: CH1/CH2(Typical) 1div from DC to 10MHz;1.5div from 10MHz to Full
EXT£¨Typical£© 200mV from DC to 40MHz
EXT/5£¨Typical£© 1V from DC to 40MHz
AC: Attenuates signals below 10Hz
HF Reject: Attenuates signals above 80kHz
LF Reject: Attenuates signals below 150kHz
Noise Reject: Reduces trigger sensitivity
Trigger Level Range
CH1,CH2: ±8 divisions from center of screen
EXT: ±1.2V EXT/5: ±6V
Trigger Level Accuracy,
typical (Accuracy is for signals having rise and fall times ≥20ns)
CH1,CH2: ±(0.3div×V/div) (within ±4 divisions from center of screen)
Holdoff Range
100ns-10s
Trigger Type
Edge
Trigger on the rising or falling edge
Pulse Width
Trigger (when >,<,=,≠) on positive or negative pulses
Pulse Width Range: 20ns-10s
Video
Trigger on an NTSC, PAL, or SECAM standard video signal
Line Range: 1-525 (NTSC), 1-625 (PAL/SECAM)
Slope
Trigger (when >,<,=,≠) on a positive or negative slope
Set Time: 20ns–10s
Overtime
from the rising or falling edge
Set Time: 20-10s
Alternate
Internal trigger on edge, pulse width, video or slope
Measurement
Cursors
Manual: The difference between voltage cursors ¡÷V; the difference between time cursors ¡÷T; 1/¡÷T calculated by Hz.
Tracing: The voltage and time at a waveform point
Automatic
Pk-Pk, Max, Min, Mean, Cyc RMS, Frequency, Period, Rise Time, Fall Time, Positive Width, Negative Width
Meter Mode
Max.Resolution
6,000 Counts
DMM Testing Modes
Voltage, Current, Resistance, Capacitance,Diode & Continuity
Max. Input Voltage
AC: 600V, DC: 800V
Max. Input  Current
AC: 10A, DC: 10A
Input Impedance
10 MΩ
Display
Type
Right angle 5.6 16-digit color LCD
Resolution
640*480 dots
Contrast
16 gears, with the progress bar to show adjustment
Interface
USB host and USB slave, Lan Optional
Power Supply
Voltage
DC Input:12--17VDC, 1500mA
Mechanical
Size
245 x 163 x 52 (mm)
Pictures:
If connect to computer, it can be used as a virtual oscilloscope
Accessories:
Package Includes:
1 x Original Package
1 x New Hantek DSO1102B Digital Handheld Oscilloscope/Multimeter 100MHz 1Gsa/S
PAYMENT
We accept
online payment
in Aliexpress here or
other payment terms
.
If there is any
import duties or taxes
,it is the
buyer's
responsibility.
Please make payment within
5 days
after you place your order.
Please
DO NOT
place your order if you are
NOT
intend to buy.
SHIPPING & DELIVERY
We will ship out the unit to you by
EMS
or
FedEx
or
DHL
. It will decided by seller according to your location
.(EMS Service Only for Russian Customers)
We will ship out the unit to the Express company first, it will take about
2-3
days, and then express company will deal with the package, so you can check the tracking number online after about
4
days. Please note this.
CONTACT US
Welcome!! Please read
ALL POLICIES
of us before your purchase.
If you have additional questions or concerns about this item, please contact us via email or trademanager. We will response the most E-mail within
24 hours
.
RETURN POLICY
If the item is defective, please notify us within
7 days
after the receipt of the item.
The item shall be return in its original condition, in order to get it refunded or replaced