Moskvich pedal car restoration kit

Description

The Moskvich pedal car restoration kit consists of the following parts:
1.
Steering wheel is suitable for pedal car Moskvich of the 2nd and 3rd series. It is made in the factory from low pressure polyethylene, like the original steering wheel. The steering wheel is equipped with a button, a ring and a spring element.
The way of installing the steering wheel: the landing hole for the steering column of the pedal car is made in minus one millimeter. This is done in order to adjust the steering wheel during installation to exactly the steering column on which he will wear, in order to ensure maximum fit and eliminate any backlash.
The steering wheel must be fixed with an M5 screw on the steering column. Before installing, you need to drill the base of the steering wheel, but only one half. It is important! Then install the steering wheel and drill a hole in place. This is the only way you will get an exact match of the holes of the steering wheel and the steering column.
T
he steering wheel is available in three colors: white, black and orange. White is the main color, black steering wheels were installed in the late 80s, orange in the late 70s.
2.
W
indshield is made of 4mm glass as factory fitted. The glass is completed with three screws for fastening to the body of the pedal car. The windshield is suitable for pedal
Moskvich
of the second and third series.
3.
Instruction, every pedal car was equipped with it. It contains: information about the design of the pedal car, the conditions of its operation, as well as a warranty repair coupon indicating the date of manufacture of the pedal car. At your request, I can put the date you specify in the instructions.
4.
Sticker "Moskvich" in the set comes in two versions: in Russian and in English (export version)
.
5.
Fixing kit. It is unique in its composition! It took me three years to find all the necessary elements in the factory version. The set consists of: a spring (it is cut into 2 springs for a
Moskvich
), screws, bolts, nuts, cotter pins, retaining rings and washers - all of them will help you assemble a pedal  car Moskvich in the factory complete set, without any "kolhoz".
6.
Back number, it is also the date of manufacture of the pedal car. The number is made of 0.5 mm aluminum. You can choose the desired number from the start of production of pedal
Moskvich
in 1973 until its end in 1994
7.
D
ashboard, it is fully consistent with the factory version. The panel is made of 0.5 mm aluminum.
8.
Electrics kit. All the wiring has already been done, you just have to install the wiring in its original place. 3.5 Volt bulbs, new, made in the USSR. The switch is also new, original, made in the USSR.
Standard battery is included.
9. Two new glass for the headlights. Plastic glasses, this is an analogue - they are used in the plafond for lighting the interior of Soviet cars. The diameter is fully suitable for the pedal Moskvich. I myself put these on my pedal Moskvich.
I am ready to answer your questions and I wish you success in your restoration works!