KKSB K1 Mini ITX Case (SFF) NEW Anodized Gray w Black panels plus BONUS!

Description

KKSB K1 Mini ITX Case,
New Condition
Grey Anodized Body w Black side panels (plus 1 clear side panel)
.  I'm selling this due to other project priorities.  Included is an extra side panel that is clear tempered glass.
NOTE
:  This is for
the case only
and what's listed below.
Included in this Buy It Now:
1 KKSB K1 Mini ITX Case grey anodized body with black panels
1 Clear tempered glass side panel
1 Users Guide
1 PCI Riser Cable
2 60mmx60mmx10mm fans
1 SATA pig tail cable (2 to 1)
Fasteners for extra GPU FAN
Back Panel Insert
Screws for 2.5" SSD
Screws for PSU
Screws for Water Cooling
Rubber Feet
Hexagon wrench
PWM fan splitter
FROM THE MANUFACTURER WEBSITE:
The case is made exclusively of sandblasted, grey anodized aluminum and powder-coated steel. The screws that come with the screws are in a black or gold shade. A sleek and simple power button is featured on the front of the case that facilitates a satisfying click when operated. On the inside, there is the possibility to insert the form factor components that allow a powerful machine to be made. For example, the case allows you to use both full-length graphics cards and short graphics cards, which comes directly after listening to user's wishes. A PCI-Express 3.0 x16 riser cable is featured with capacity for card lengths up to 300mm of dual-slot PCI (40mm width). The effective frameless design means that even though the case can hold the mini-ITX board with powerful additions, it still only comes to a total size of 310 mm x 138 mm x 195 mm. (Excluding rubber feet and GPU bracket).
For optimal computer function, planned effective cooling is needed, especially when using a Mini ITX form factor case. An SFF case has the further constant challenge of cooling down both the CPU and GPU. In our case, we made it possible to install extra fans to the case, also with the capacity to select a 54mm fan to circulate and exhaust as much air as possible. In addition, there are plentiful ventilation holes to keep the airflow in balance. This means that no extra modules are needed for the cooling to operate effectively. Even though the compact design is of importance, space for adequate and powerful cooling must still be given priority.
Technical Details
Structural thickness: 1 mm
Volume: 7.1 litres
Dimensions: Exterior dimensions: 310 mm x 138 mm x 195 mm, Excluding rubber feet and GPU bracket.
Material: Aluminum Anodized Gray, High-Grade Steel
Exterior: Gray anodized Aluminum & Black powder coat, Golden colour details.
Form Factor: Mini-ITX
Possible fans:
2 pieces 60 mm x 60 mm x 10 mm (under motherboard) & 1 piece 60 mm x 60 mm x 25 mm under GPU.
Storage: 2 pieces 2.5 "
PSU: SFX (max 100mm)
Expansion slots: 2 (Dual-Slot)
The case is adapted for SFX power supply.
Cables: PCIe 3.0 x16 Riser Module for GPU, 230 power cord cable, Y-SATA splitter, 1-3 PWM fan splitter.