-40%

Hantek 2D42 2 Channel 3in1 Handheld oscilloscope DMM Multimeter tester US Stock

$ 77.08

Availability: 62 in stock
  • MPN: Does Not Apply
  • Condition: New
  • All returns accepted: ReturnsNotAccepted
  • Brand: Hantek

    Description

    Model
    Hantek2D72
    Hantek2D42
    Hantek2C72
    Hantek2C42
    Oscilloscope Mode
    Bandwidth
    70MHz
    40MHz
    70MHz
    40MHz
    Channel
    2CH+DMM+AWG
    2CH+DMM+AWG
    2CH+DMM
    2CH+DMM
    Horizontal
    Sample Rate Range
    250MSa/s(Single-channel), 125MSa/s(Dual-channel)
    Waveform Interpolation
    (sin x)/x
    Record Length
    Max. 6K for single-channel; 3K samples per dual-channel
    SEC/DIV Range
    5ns/div~500s/div 1, 2, 5 sequence
    Vertical
    A/D Converter
    8-bit resolution,each channel sampled simultaneously
    VOLTS/DIV Range
    10mV/div~10V/divat input BNC
    Bandwidth Limit, typical
    20MHz
    Low Frequency Response (-3db)
    ≤10Hz at BNC
    Rise Time at BNC, typical
    ≤5ns
    DC Gain Accuracy
    ±3% for Normal or Average acquisition mode, 10V/div to 10mV/div
    Note: Bandwidth reduced to 6MHz when using a 1X probe.
    Acquisition
    Acquisition Modes
    Normal
    Trigger
    Type
    Edge
    Mode
    Auto, Normal, single
    Level
    ±4 divisions from center of screen
    Trigger Level Accuracy
    0.2div × volts/div within ±4 divisions from center of screen
    Slope
    Rising, Falling, Rising & Falling
    Source
    CH1/CH2
    Input
    Coupling
    DC, AC or GND
    Input Impedance,
    25pF±3 pF, 1MΩ±2%
    DC coupled
    Probe Attenuation
    1X, 10X
    Supported Probe Attenuation Factors
    1X, 10X, 100X, 1000X
    Maximum Input Voltage
    150V
    RMS
    Measurement
    Cursor
    Voltage difference between cursors: △V
    Time difference between cursors: △T
    Automatic Measurements
    Frequency, Amplitude
    Arbitrary Waveform Generator Mode
    Waveform Frequency
    Sine: 1Hz~25MHz
    -
    -
    Square: 1Hz~10MHz
    -
    -
    Ramp: 1Hz~1MHz
    -
    -
    EXP: 1Hz~5MHz
    -
    -
    Sampling
    250MSa/s
    -
    -
    Amplitude
    2.5Vpp(50Ω)
    -
    -
    5Vpp(High impedance)
    -
    -
    Frequency Resolution
    0.10%
    -
    -
    Channel
    1CH waveform output
    -
    -
    Waveform Depth
    512Sa
    -
    -
    Vertical Resolution
    12 bit
    -
    -
    Output Impedance
    50 Ω
    -
    -
    DMM
    Maximum Resolution
    4000 Counts
    DMM Testing Modes
    Voltage,Current,Resistance,Capacitance,Diode &On-Off
    Maximum Input Voltage
    AC:600V, DC: 800V
    Maximum Input Current
    AC: 10A, DC:10A
    Input Impedance
    10MΩ
    Measurement Term
    Range
    Accuracy
    Resolution
    DC Voltage
    400.00mV
    ± (0.8% + 5)
    100uV
    4.000V
    1mV
    40.00V
    10mV
    400.0V
    100mV
    600.0V
    ± (1% + 2)
    1V
    Overload protection: 400mV: 250V, other: 600Vrms.
    AC Voltage
    4.000V
    ± (1.2% + 5)
    1mV
    40.00V
    10mV
    400.0V
    100mV
    600.0V
    ±(1.5% + 5)
    1V
    Frequency: 40Hz~400Hz;
    Frequency of 400V and 600V: 40Hz~100Hz
    DC Current
    40.00mA
    ± (1% + 2)
    10uA
    200.0mA
    ± (1.5% + 2)
    100uA
    4.000A
    ± (1.8% + 2)
    1mA
    10.00A
    ± (3% + 2)
    10mA
    Overload protection:
    self restoring fuse: 200mA/250V, 4A and 10A range no fuse.
    AC Current
    40.00mA
    ± (1.3% + 2)
    10uA
    400.0mA
    ± (1.8% + 2)
    100uA
    4.000A
    ± (2% + 3)
    1mA
    10.00A
    ± (3% + 5)
    10mA
    Frequency: 40Hz~400Hz;
    self restoring fuse: 200mA/250V, 4A and 10A range no fuse.
    Resistance
    400.0Ω
    ±(1% + 3)
    0.1Ω
    4.000KΩ
    ±(1.2% + 5)

    60.00KΩ
    10Ω
    400.0KΩ
    100Ω
    4.000MΩ
    1KΩ
    40.00MΩ
    ± (1.5%±3)
    10KΩ
    Overload protection: 220Vrms
    Capacitance
    40.00nF
    ±(3% + 5)
    10pF
    400.0nF
    100pF
    4.000uF
    1nF
    40.00uF
    10nF
    100.0uF
    100nF
    Overload protection: 220Vrms
    Diode
    0V~2.0V
    On-Off
    <50Ω
    General Specifications
    Display
    Display Type
    2.8 inch64K color TFT
    Display Resolution
    320 horizontal by 240 vertical pixels
    Display Contrast
    Adjustable
    Power Supply
    Supply Voltage
    100V-240VAC, 50Hz-60Hz; DC INPUT: 5VDC, 2A
    Power Consumption
    <2.5W
    Fuse
    T, 3A
    Battery
    2600mA*2
    Environmental
    Operating Temperature
    0~50 °C (32~122 °F)
    Storage Temperature
    -40~+71 °C (-40~159.8 °F)
    Humidity
    ≤+104℉(≤+40°C): ≤90% relative humidity
    106℉~122℉ (+41°C ~50°C): ≤60% relative humidity
    Cooling Method
    Convection
    Altitude
    Operating and
    3,000m (10,000 feet)
    Nonoperating
    Mechanical Shock
    Random Vibration
    0.31g
    RMS
    from 50Hz to 500Hz, 10 minutes on each axis
    Nonoperating
    2.46g
    RMS
    from 5Hz to 500Hz, 10 minutes on each axis
    Operating
    50g, 11ms, half sine
    Mechanical
    Dimension
    199 x 98x 40mm (L x W x H)
    Weight
    624g
    Standard Accessories
    Probe*1,Clip Probe*2, Type Charging Cable*1, Power Adapter*1, Multimeter Probe*1
    Probe*1,Clip Probe*2, Type Charging Cable*1, Power Adapter*1, Multimeter Probe*1
    Probe*1,Clip Probe*1, Type Charging Cable*1, Power Adapter*1, Multimeter Probe*1
    Probe*1,Clip Probe*1, Type Charging Cable*1, Power Adapter*1, Multimeter Probe*1
    Payment:
    Please use Paypal for the payment.
    Shipping:
    1.
    The item will be shipped out in 1~3 business days after payment cleared
    2.
    We’ll notify you the order status and shipping info, the time shipped, the tracking number and the tracking website once it’s been shipped. If you don’t receive the email from us (thru eBay), please check your spam folder. Please contact your local post office for missing or damaged package. We ship USPS, UPS or Fedex depending on the item.
    Feedback:
    Once we receive positive feedback from you we will do the same for you.  We want to be sure you are 100% satisfied with your purchase. Please contact us if there are any questions or concerns about your purchase first.
    Return:
    We offer a 14 days money back guarantee. Please contact us through ebay email before returning any items.
    1.
    We don’t provide return label.
    2.
    Please make sure item and its packing in good condition, and can be sold in the future.
    There is no marks on the item, not alternated.
    Return items should include the original packaging and accessories.
    Otherwise, we feel sorry that we could not be able to return full payment.
    3.
    Please put a paper in the package, on which your ID number, purchase date and reasons for return should be marked.
    4.
    Buyers are responsible for the
    return shipping costs
    and
    8% open box fee
    under any circumstances.