Fluke 192B 196B 196C 199B 199C Scopemeter Keypad Contact Board (Replaces Foil)

Description

This listing is for Fluke 192B, 196B, 196C, 199B, and 199C Scopemeters only.
For 192, 196, and 199 (without B or C suffix) replacement keypad boards, see listing #
231220134535
.
Does your Fluke 192B, 196B, 196C, 199B, or 199C Scopemeter have buttons that will not respond? Most likely the problem is with the keypad contact foil below the keypad membrane. The polyimide-carbon films are prone to failure over time due to the flexing action caused every time a button is pressed.
Recognizing the weaknesses of the original Fluke keypad contact foil, we developed our own replacement boards that are much more substantial and durable. Designed as a drop-in replacement, these contact boards simply take the place of the defective plastic foil. No special tooling or knowledge is required. The replacement can be completed in 10 minutes or less using just a Torx T10 screwdriver. Most users will have already disassembled their Scopemeter to have discovered the defective keypad foil in the first place.
Some symptoms of a defective keypad foil are:
Non-functioning buttons
Instrument will not power on*
Erratic behavior
*If your Scopemeter will not turn on, there could be a more serious problem. You are welcome to contact us for assistance to determine if the keypad foil is at fault or if the problem lies deeper.
Lifetime Warranty!
If this product fails under normal, reasonable, and usual operating conditions and use, we will replace it at no charge. For our complete Terms & Conditions, please visit our website.