ETEPON Digital Oscilloscope Kit with BNC-Clip Cable Probe with Power Supply.....

Description

ETEPON Digital Oscilloscope Kit with BNC-Clip Cable Probe with Power Supply.....
【ASSEMBLED FINISHED】ETEPOPN EM001 digital DIY oscilloscope kit is an assembled finished machine No soldering / assembly work needs It can be used directly to avoid assembling /welding process problems and greatly save your time
【UPGRADED VERSION】The sensitivity of the EM001 has been extended both in width and height which is wider and higher than the others It reaches 5mV / div - 20V / div while the others is only 10mV / div - 5v / div
【HAND-HELD】This updated digital oscilloscope can be hand-held while the others can only be used by placing it on the desktop
【ROTARY ENCODER】It has been added the rotary encoder makes parameter adjustment more quicker and easier
【WHAT YOU GET】You will get a assembled oscilloscope and BNC-clip cable Detailed Operation instructions troubleshooting guide and schematic are also provided
ETEPON EM001 oscilloscope kit is an assembled finished machine which can be used directly. Unlike DIY oscilloscope kit, you don’t need to do assembly or soldering work before using, which will avoid some problem caused on soldering or assembling process and save your time. Great Replacement ✔ Extended both in width and height ✔ Hand-held ✔ Added the rotary encoder, makes parameter adjustment more quicker and easier. ✔ Easily capture instantaneous wave forms using the Auto/Normal/Single Trigger mode. ✔ Display and MCU are mounted on the same board (main board) to avoid using inter-board pin-headers. Analog channel is placed on a separated board which contains most user install parts, so the analog and digital circuits can be better separated. Specification Number of Channel: 1 Analog Bandwidth: 0 - 200KHz Sensitivity: 5mV/Div - 20V/Div Sensitivity error: < 5% Resolution: 12-bit Input Impedance: 1M ohm Maximum Input voltage: 50Vpk Coupling: DC, AC, GND Trigger Modes: Auto, Normal, Single Trigger Types: Rising/falling edge Trigger Position: 1/2 of buffer size fixed Display: 2.4 inch color TFT LCD with 320 x 240 resolution Power Supply: 9V DC (8 - 10V acceptable), NOT INCLUDED Dimension: 115mm X 75mm X 22mm Weight: 100 gram (not including cables and power supply) Packing Lists 1 * Oscilloscope 1 * BNC-clip cable 1 * Users Manual Kindly Note 1. It runs on 9V power adapter. The power supply voltage must not exceed 10V. Otherwise it is possible to burn out the machine. 9v dc power supply should be center positive. 2. The kit does not contain a power adapter, it is quite easy to get one. Please prepare yourself.
Shipping
We offer FREE shipping on all orders!
We ship within Three business days of payment, usually sooner.
We use a selection of shipping services such as UPS, FedEx, USPS etc.
We only ship to the lower 48 states, no APO/FPO addresses or PO Boxes allowed.
Local pickups and combined shipping options are not provided at this time.
Return
You can return a product for up to 30 days from the date you purchased it.
Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt.
Payment
We accept payment by any of the following methods:
PayPal
Please pay as soon as possible after winning an auction, as that will allow us to post your item to you sooner!
Feedback
Customer satisfaction is very important to us.
If you have any problem with your order, please contact us and we will do our best to make you satisfied.
Contact Us
If you have any queries, please contact us via ebay. We usually respond within 24 hours on weekdays.
Please visit our eBay store to check out other items for sale!
Thank you for shopping at our store.