DSO138 Mini Digital Oscilloscope DIY Parts Kit Electronic Learning Training Set

Description

Description
Specifications:
Condition: Brand New
Material: PCB
Number of Channel: 1
Analog Bandwidth: 0-200KHz
Sensitivity Range: 10mV/Div - 5V/Div
Sensitivity Error: <5%
Maximum Input Voltage: 50Vpk (1X probe)
Input Impedance: 1M ohms/20pF
Resolution: 12 bits
Record Length: 1024 points
Coupling Modes: DC / AC / GND
Maximum Real-time Sampling Rate: 1MSa/s
Time Base Range: 10us/Div - 500s/Div
Trigger Modes: Auto, Normal, and Single
Trigger Position: Center of Buffer
Display: 2.4" Color TFT LCD with 320*240 Resolution
Supply Voltage: DC 3.5V - 5V
Current Consumption: ~120mA @ 5V
Main Board Size: Approx. 70 * 53mm / 2.76 * 2.1in
Analog Board Size: Approx. 81 * 70mm / 3.19 * 2.76in
Features:
2.4-inch color TFT LCD with 320*240 resolution displays parameters clearly.
Make MCU and LCD stay in one PCB to avoid problematic pin-header connections.
Overall size of DSO138mini is only 2/3 of DSO138 so it is much more suitable for hand-held operation.
Improvements in power supply and mechanical structure, it can run on USB or a single cell 3.7V Li-ion battery.
Can be connected with computer for data transmission.
DSO138mini has improvements in firmware, too.
Its trigger can work reliably under 10us and 20us timebase settings.
With Auto/Normal/Single trigger modes, easy to capture the moment waveform.
Available rising or falling edge trigger.
Observable previous trigger waveform (negative delay).
Can freeze at any time waveform display (HOLD function).
Waveform storage function: will not lose the waveform after power off.
Short-circuit and open-circuit detection: can help the user find out the soldering error.
TFT controller recognition function.
All SMD parts has been soldered and the MCU has been programmed.
Comes with a transparent case, can protect the oscilloscope well.
Note:
The SMD parts in this DIY kit has been soldered, you just need to solder other parts by yourself.
Package Included:
1set x DSO138mini DIY Kit
1pc x Transparent Case
1pc x User Manual (English)
Detail Image
Payment
1. Payment is needed to receive within 7 days after deal.if not we will close the transaction.
2. We only accept PayPal.
3. PayPal is the only online payment method we accept. Please make sure you have a valid/confirmed PayPal account prior bidding. And please make sure that your PayPal registed address is the same with your eBay registed address.
Customs Declaration:
Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility.
Please check with your country's customs office to determine what these additional costs will be prior to biddingying.
DHL can not reach to few remote areas in your country,if you choose Express and living remote areas. You should pay the additional shipping charge. If your area belongs to remote areas, the parcel can't reach, or you need to pay more freight, our customer service will contact you.
If you need to add the tracking number, be sure to contact customer service before making orders especial for the people comes from the country of Eastern Europe, the Middle East and South American. It needs to pay the extra shipping cost!
Order can not be shipping to any P.O boxes. Order can only be shipped to physical addresses.