2CH 200MHz Oscilloscope 16CH Logic Analyzer Waveform Generator 3in1 Touch Screen

Description

Note: we'll ship this item via
Express Mail Service or SpeedPAK
to USA, Canada, Australia,
New Zealand, Ireland, Austria, Belgium, Denmark, Germany, France, Finland, Luxemburg,
Malta, Norway, Sweden, Swiss, Spain, Italy, UK, Japan, Korea,Thailand, Malaysia, Indonesia,
Philippine, Singapore.
Clients from other countries pls contact with us in advance to confirm
the different shipping charges before you order.
MPO6202D
★Six in one oscilloscope:2 channels oscilloscope+16 channels logic analyzer+2 channels waveform generator+digital voltmeter+serial protocol analyzer+FFT spectral analysis.
★60 000 wfms/s (dots display)/400,000 wfms/s (dots display quick acquisition mode) waveform capture rate.
★Segmented acquisition function,support to capture up to 80,000 sections. 256 grade color display.
★Up to 16 kinds of trigger functions, including 5 kinds of protocol triggers.Supply 5 serial decoding option.
★1 GSa/s real-time sample rate of the analog channels; 64 Mpts standardmemory depth.
★2-channe signal source,13 kinds of waveforms inside,4 sets of arbitrary waveforms,200M sample rate,8Kpts waveform length.
★1 GSa/s real-time sample rate of the digital channels.
★200 MHz, 100 MHz and 80 MHz analog channel bandwidth.
★Low base noise, 500uV/div to 10 V/div ultra-wide vertical dynamic range.
★7 inch WVGA capacitive touch screen,(800*480) TFT , with ultra-wide screen, vivid picture, lowpower consumption and long service life.
★Auto measurement of 42 kinds of waveform parameters (with statistics).
★5 bits digital voltage meter and 6 bits hardware frequency indicator function.
★Bode diagram function(the oscilloscopes with signal source function can use).
★Multiple waveform math operation functions【MATH】.Event search function.
★Standard interfaces: USB Device, USB Host, LAN,Optional interfaces: HDMI ，UART
★Conform to LXI CORE 2011 DEVICE class instrument standards; enable quick,
economic and efficient creation and reconfiguration of test system.Supports remote command control.
Oscilloscope function
Acquisition
Real-time sample rate
1 GSa/s（single channel） 500 MSa/s（two channels）
Note：digital channel 12，34 open at the same time,it is considered as one channel
Peak detection
Analog channel 4ns
Note：digital channels don’t support
Average mode
Analog channel
All channels reach N time samples at the same time，N can be selected from
2、4、8、16、32、 64、128、256、512 and 1024.
Note：digital channels don’t support
High resolution
Up to 12bit
Note：digital channels don’t support
Minimum test pulse width
8ns
Memory depth
Single channel 64M
Two channels 32M
Input
Channel quantity
4 analog channels
Note：data channels can’t be opened
3 analog channels
Note：digital channel LA1/LA2/LA3/LA4/LA1LA2/LA3LA4
2 analog channels
Note：digital channels infinitize
1 analog channel
Note：digital channels infinitize
0 analog channel
Note：digital channels infinitize
Input coupling
DC、AC or GND
Note：digital channels don’t support
Input impedance，DC coupling
Analog channel
25pF±3 pF，1MΩ±2%
Digital channel
(300KΩ±2%) ，(8 pF±3 pF)
Supported probe attenuation  factor
Analog channel 1X、10X、100X、1000X
Voltage classes
300V CAT II
Maximum input voltage
Analog channel 300VRMS (10X)
Digital channel -25V~25V
Horizontal
Waveform interpolation
(sin x)/x
Maximum record length
Single channel maximum 64M
Two channels maximum32M
three/four channels maximum 16M
Horizontal scale range
DSO6084 DSO6104
2ns/div~100s/div  1， 2， 5 step by step
Time base mode
Y-T、X-Y、Roll
X-Y number
Channel 1,2 1 XY channel、channel3 4 1 XY channel
Zero offset
±0.5 div× minimum time base gear
Sample Rate and
±25ppm
Delay Time Accuracy
Clock drifting
≤±5 ppm/year
Delta Time Measurement
single，“acquisition”mode
Accuracy
(Full Bandwidth)
±（1 sample interval+100ppm×reading+0.6ns）
＞16 times averages
±（1 sample interval+100ppm×reading+0.4ns）
Sample interval=sec/div÷200
Vertical
Bandwidth（-3db）
DPO6082
DPO6102
DPO6202
80MHz
100MHz
200MHz
Vertical resolution
Analog channel 8bit
Digital channel 1bit
Vertical scale range
nput BNC position is 500μV/div~10V/div
Position range
500μV/div to 120mV/div，±1V
122mV/div to 1.2V/div，±10V
1.22V/div to 10V/div，±50V
Optional analog bandwidth limitation
Typical 20MHz
Bass response（-3db）
In BNC position is≤10Hz
Rising time in BNC position，typical
DPO6082
DPO6102
DPO6202
≤4.4ns
≤3.5ns
≤1.8ns
Vertical gain accuracy
In “normal” or “average” acquisition mode，the accuracy of 10V/div to 10mV/div is ±3%
In “normal” or “average” acquisition mode，the accuracy of 5mV/div to 500uV/div is ±4%.
DC offset accuracy
±0.1 div±2 mV±1% offset value
The isolation of channels
DC maximum bandwidth：>40 dB
Note: Bandwidth reduced to 6MHz when using a 1X probe
Trigger
Trigger level range
±5 divisions from the center of the screen
Trigger mode
auto、general、single
Level
CH1~CH2
±4 divisions from the center of the screen
Holdoff range
8ns~10s
Trigger level accuracy
CH1~CH2
0.2 div×volts/div within ±4 divisions from the center of the screen
Edge trigger
Slope
Rising edge，falling edge，rising or falling edge
Signal source
CH1~CH2，
D1.0~D1.3，
D2.0~D2.3，
D3.0~D3.3，
D4.0~D4.3
Pulse width trigger
Polarity
Positive polarity，negative polarity
Condition(When)
<，>， !=， =
Signal source
CH1~CH2，
D1.0~D1.3，
D2.0~D2.3，
D3.0~D3.3，
D4.0~D4.3
Pulse width range
8ns ~ 10s
Video trigger
Signal standard
NTSC， PAL
Signal source
CH1~CH2
Synchronization
Scanning line、line number、odd field、even field、all field
Slope trigger
Slope
rise，fal
condition(When)
<，>， !=， =
Signal source
CH1 ~ CH2
Time range
8ns ~ 10s
Overtime trigger
Signal source
CH1~CH2，
D1.0~D1.3，
D2.0~D2.3，
D3.0~D3.3，
D4.0~D4.3
Polarity
Positive polarity，negative polarity
Time range
8ns ~ 10s
Window trigger
Signal source
CH1~CH2LA1~LA4
Pattern trigger
Pattern
0:low level；1:high level；X:ignore；
Level（signal source）
CH1~CH2
Interval trigger
Slope
rise，fall
condition(When)
<，>， !=， =
Signal source
CH1~CH2，
D1.0~D1.3，
D2.0~D2.3，
D3.0~D3.3，
D4.0~D4.3
Time rangeTime range
8ns ~ 10s
Delay trigger
Edge type
Rising edge，falling edge
Signal source
CH1~CH2
condition(When)
<，>， !=， =
Time range
8ns ~ 10s
Set up hold trigger
Edge type
Rising edge，falling edge
Signal source
CH1~CH2
condition(When)
<，>， !=， =
Time range
8ns ~ 10s
Runt trigger
Polarity
Positive polarity，negative polarity
Condition(When)
<，>， !=， =
Signal source
CH1~CH2
Time range
8ns ~ 10s
UART trigger
condition(When)
start、stop、data、odd-even check、reception error
Signal source(RX/TX)
CH1~CH2，
D1.0~D1.3，
D2.0~D2.3，
D3.0~D3.3，
D4.0~D4.3
Data format
Hex（hexadecimal）
Data length
1 byte
Data bit width
5 bit， 6 bit， 7 bit， 8 bit
Odd-even check
none、odd、even
Free level
high、low
Baud rate (optional)
110/300/600/1200/2400/4800/9600/14400/19200/38400/57600/11520
0/230400/380400/460400 bit/s
Baud rate(user-defined)
300bit/s~334000bit/s
LIN trigger
condition(When)
Interval field、synchronization field、ID field、synchronization error、identifier、IDand data
Signal source
CH1~CH2，
D1.0~D1.3，
D2.0~D2.3，
D3.0~D3.3，
D4.0~D4.3
Data format
Hex（hexadecimal）
Baud rate(optional)
110/300/600/1200/2400/4800/9600/14400/19200/38400/57600/11520
0/230400/380400/460400 bit/s
Baud rate(user-defined)
300bit/s~334000bit/s
CAN trigger
condition(When)
Start bit、remote frame ID、data frame ID、frame ID、remote frame data、data frame data、wrong frame、all errors、answer error、overload frame
Signal source
CH1~CH2
Data format
Hex（hexadecimal）
Baud rate(optional)
10000， 20000， 33300， 500000， 62500， 83300， 100000， 125000
， 250000， 500000， 800000， 1000000
Baud rate(user-defined)
5kbit/s~1Mbit/s
SPI trigger
Signal source
CH1~CH2，
D1.0~D1.3，
D2.0~D2.3，
D3.0~D3.3，
D4.0~D4.3
Data format
Hex（hexadecimal）
Data bit width
4， 8， 16， 24， 32
IIC trigger
Signal source (SDA/SCL)
CH1~CH2，
D1.0~D1.3，
D2.0~D2.3，
D3.0~D3.3，
D4.0~D4.3
Data format
Hex（hexadecimal）
Data index
0~7
opportunity(condition)
Start bit、stop bit、no response、address、data、restart
Measurement
cursor
Voltage difference between cursors △V
Time difference between cursors △T
Reciprocal of △T，in Hertz（1/△T）
Auto measurement
frequency、period、mean、peak-to-peak、RMS、minimum、mixmum、rising time、falling time、+ width、- width、base、top、middle、amplitude、overshoot、preshoot、rising edge phase difference、falling edge phase difference、+ duty、- duty、period mean、PRMS、FOVshoot、ROVshoot、BWIDTH、FRF、FFR、LRR、LRF、LFR、LFF
DVM
Data source
CH1，CH2
Measurement type
DC effective value
AC effective value
DC
Frequency meter
hardware 6 bits frequency meter
Arbitrary waveform generator
Arbitrary waveform generator(for oscilloscopes with signal source channels)
Channel number
2 channels
Sample rate
200MSa/s
Vertical resolution
12 bits
Maximum frequency
25 MHz
Standard waveforms
sin、square、pulse、triangular，noise、DC
Sinc、index、semi-distortion、lorentz，dual tone multiple frequency，gauss，ECG
Arbitrary waveform
Arb1，Arb2，Arb3，Arb4
Sin
Frequency range
0.1Hz~25MHz
square/pulse
Frequency range
0.1Hz~10MHz
triangular wave
Frequency range
0.1Hz~1MHz
Sampling wave
Frequency range
0.1Hz~1MHz
Index
Frequency range
0.1Hz~5MHz
Semi-distortion
Frequency range
0.1Hz~1MHz
lorentz
Frequency range
0.1Hz~1MHz
Dual tone multiple frequency
Frequency range
0.1Hz~1MHz
Gauss
Frequency range
0.1Hz~1MHz
ECG
Frequency range
0.1Hz~1MHz
Arbitrary wave
Frequency range
0.1 Hz to 10 MHz
Waveform length
8KSa
Frequency
accuracy
100 ppm（<10 kHz） 50 ppm（>10 kHz）
resolution
0.1 Hz or 4 bits，take the greater one
Amplitude
Output range
10mV~7Vp-p(high impedance)
5mV~3.5Vp-p(50Ω)
DC offset
range
±3.5 V，high impedance
±1.75 V，50 Ω
resolution
100 μV or 3 bits，take the greater one
accuracy
2%（1 kHz）
Output impedance
50 Ω
Logic analyzer
Logic analyzer
Input impedance,DC coupling
Digital channel
(300KΩ±2%) ，(8 pF±3 pF)
Threshold value
4 channels in 1 group adjustable threshold value
Threshold option
TTL（1.4 V）
5.0 V CMOS（+2.5 V）
3.3 V CMOS（+1.65 V）
2.5 V CMOS（+1.25 V）
1.8 V CMOS（+0.9 V）
ECL（-1.3 V）
PECL（+3.7 V）
LVDS（+1.2 V）
0V
User-defined
Threshold range
±7.0V，10mV step by step
Threshold accuracy
±(100mV+3% threshold setting)
Dynamic range
±5.0V+ threshold
Minimum voltage swing
500 mVpp
Vertical resolution
1 bit
General specifications
Display
Display type
7"TFT  diagonal liquid crystal
Display resolution
800（horizontal）*480（vertical）pixels
Display colour
16 million colours（24 bits true colour）
Persistence time
minimum、1 s、5 s、10 s、30S、infinite
Display type
dot、vector
Display mode
Color temperature，gray scale
Display brightness
adjustable
Grid type
adjustable
Grid brightness
adjustable
Interface
Standard interface
USB Host，USB Device，LAN
Optional interface
PassFail
UART
HDMI
General specifications
Probe compensator output
Output voltage ，typical
about 2Vpp input≥1MΩ load
frequency、typical
1kHz
Power supply
100-120VACRMS(±10%)，45Hz to 440Hz，CATⅡ
120-240VACRMS(±10%)，45Hz to 66Hz，CATⅡ
Power consumption
<30W
Fuse
T，3.15A，250V，5x20mm
Operating temperature
0~50 °C (32~122 °F)
Storage temperature
-40~+71 °C (-40~159.8 °F)
Humidity
≤+104℉(≤+40°C): ≤90% relative humidity
106℉~122℉ (+41°C ~50°C): ≤60% relative humidity
Cooling method
convection
Altitude
Operating and nonoperating
3，000m（10，000 feet）
Mechanical shock
Random vibration
0.31 g
RMS
from 50Hz to 500Hz，
10 minutes on each axis
Nonoperating
2.46g
RMS
from 5Hz to 500Hz，
10 minutes on each axis
Operating
50g，11ms，half-sine wave
Mechanical
Size
318 x 140 x 150mm(length x width x height)
Weight
2900g