1013D 7\\"inch 100MHz FFT Display Bandwidth Digital FNIRSI Storage Oscilloscope

Description

Home
Arduino
Module
Sensor
Chips
About Us
Description:
FNIRSI-1013D is a full-featured, highly practical, cost-effective dual-channel flat-panel oscilloscope launched by FNIRSI for the maintenance and R & D industry;
this oscilloscope has a real-time sampling rate of 1GSa / s and an analog bandwidth of 100MHz * 2 . With complete trigger function (single / normal / automatic), it can be used freely for periodic analog signals or non-periodic digital signals;
the built-in high-voltage protection module can tolerate a continuous voltage of up to 400V.
Oscilloscope burnout accident caused by the probe being turned to the 10X position. Large time base scroll mode can monitor slow level changes;
Equipped with highly efficient one-key AUTO, which can display the measured waveform without tedious adjustments; the display is equipped with a 7-inch 800 * 480 resolution high-definition LCD LCD screen, and the operation method is capacitor Screen touch + gesture operation, extremely convenient;
Cursor measurement function, you do not need to read the background scale unit and quantity when manually reading the amplitude and frequency parameters, and you can directly get the peak, peak and frequency without conversion;
Extremely convenient screenshot And waveform storage function, built-in 1GB storage space, can store up to 1000 screenshots + 1000 sets of waveform data, the storage process is simple and fast, save the current waveform anytime, anywhere with a single touch, no cumbersome prompts and choices, keep calm The current data is saved in the place, which is very convenient;
The powerful waveform picture manager supports thumbnail browsing, viewing, detailed viewing, page turning, deletion and waveform zooming in, zooming out, moving, etc., to facilitate secondary analysis.
The fuselage is equipped with a USB interface, which can be connected to a computer to share its screenshots with the computer, which is convenient for secondary analysis;
Lissajous figures graphic display function can be used to determine the amplitude, frequency, and phase contrast of two groups of signals; Analysis of the harmonic components of the signal;
Built-in 6000mah high-quality lithium battery, which can last for 4 hours on a full charge, and can be used while charging like a notebook.
Key features:
1.Intelligent anti-burn,1X Can withstand up to 400V withstand voltage
2.100MHz analog bandwidth @ 1GSa/s sampling rate（1X = 5MHz，10X = 100MHz）
3.Fully fit 7 inch 800 * 480 resolution color TFT LCD display with bright colors and high contrast
4.Capacitive touch screen, the same as the touch mode of modern mobile ipad, is not a resistive touch
screen with ancient nail operation
5.High measurement voltage range, 1X can measure 0 ~ 40 V, 10X can measure 0 ~ 400V，100X can measure 0 ~ 4000V
6.Up to 12 parameters measurement：VPP，VP，Vmax，Vmin，Vavg，Vrms，Frequent，Duty+，Duty-，Time+，Time-，Period
7.Cursor measurement function, it is convenient to manually measure the period and frequency voltage
8.Complete triggering function (single, normal, automatic)
9.At any time, the waveform display (pause function) is frozen
10.Equipped with high efficiency One-button AUTO
11.One-button waveform storage and screenshot
12.Built-in 1GB storage space, can store up to 1000 screenshots + 1000 sets of waveform data
13.Powerful waveform picture manager supports thumbnail browsing, viewing, detailed viewing,
page turning, deletion and waveform zooming in, zooming out, moving, etc.
14.Equipped with a USB interface, which can be connected to a computer to share its screenshots with the computer, which is convenient for secondary analysis
15.Lissajous figures graphic display function can be used to determine the amplitude, frequency,
and phase contrast of two groups of signals
16.FFT display function, can analyze the spectral characteristics of the signal
17.Built in 6000mAh rechargeable lithium battery,Fully charged for 4 hours of continuous use at the
highest screen brightness
18.Memory compression technology, waveform refresh screen does not flicker
19.Screen brightness adjustment
20.Background grid brightness adjustment
21.Ultra thin, easy to carry
Specifications:
1.Analog band width: 100MHz * 2
2.Number of channels：2 channels
3.Maximum real time sampling rate: 1GSa/s
4.Vertical sensitivity: 50 mV/div ~ 500 V/div
5.Horizontal time base range: 50S/div ~ 10nS/div
6.Maximum test voltage: 40 V (1X probe), 400 V (10X probe)
7.Storage depth: 240Kbit
8.Input resistance: 1M
9.ADC precision: 8bits
10.Coupling mode: AC/DC
11.Trigger mode: Single, Normal, Auto
12.Trigger edge: Rising edge/Falling edge
13.External trigger voltage 0 – 40 V
14.Display: 7 inch - 800*480
15.Operating: Capacitive touch screen + gesture
16.Extension ports：USB picture export
17.Power supply: 6000 mAh lithium battery
18.Size: 184mm x 124mm x 50mm
19.Total weight:650g
Package includes:
1 x FNIRSI-1013D oscilloscope host
2 x Matching 100MHz probe（1X and 10X）
1 x 5V2A Charger（Include USB data line）
1 x User manual (English)
Payment
Shipping
Refund
Payment
We accept PayPal only.
But we only
Accept
your
Ebay Address
,Please Make sure it's 100% right.
Payment must be received in 5 business days of auction closing.
Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
Shipping
Fill your shipping info
Refund
All package need to
wait 30 days
(US only n
eed 7-10 days)
,
Please take care it.Less than 30 days,we can't take a refund
.
If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please contact us and double check the return address before you return it.
If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.